BF 109 K-4 Lt Gallori Hasegawa/Stormo! 1/32

gruson · Post by **gruson** » Thu Oct 27, 2011 4:05 pm

Hi,
I present you my new modelling, an BF 109 K-4.
For building this kit, I used many things:

- EaglesParts resin for the cockpit
- MDC Spinner and exhausts
- Air Master series for the MG-131
- Stormo! decals Part III

I decided to represent the 109 flown by the LT Gallori.

I started by the cockpit, some pics:

The internal parts of the interior are painted in Tamiya XF-63
The other details are then painted using several shade of acrylic Prince August.

Regards
michel

Post by **Editor** » Thu Oct 27, 2011 6:32 pm

Wow, that's incredible. Beautiful work so far Michel, as always! Very much looking forward to the completion of this kit!

Vincent Biondi · Post by **Vincent Biondi** » Sat Oct 29, 2011 3:26 pm

I am speechless!!
Great work so far, Michel.
Vincent

gruson · Post by **gruson** » Thu Nov 03, 2011 5:00 am

Many Thanks

the main gear retraction jack ( tube Evergreen) was mounted behind the set of the holes drilled.
the leather weather stripping made with TAM . The sewings are represented with a castor rivet Trumpeter and painted with acrylic shades Leather and green chestnut.
The system of undercarriage made with a piece of PE

The oil cooler was deepened with plastic card

the continuation with pics

the spinner with correct "teardrop"

The position of the control column, obliges me to move elevator and rudder

now apply the rivet detail.

Regards
michel

D520 · Post by **D520** » Thu Nov 03, 2011 5:30 am

Not bad Michel not bad at all, love the precision work and the attention to details, because they make the difference between a very good and an average modeler! Keep on trucking brother!

gruson · Post by **gruson** » Thu Nov 03, 2011 5:42 am

Thanks Jean,
It is contagious you gave me the virus !

Post by **Editor** » Thu Nov 03, 2011 10:07 am

Great attention to detail!

gruson · Post by **gruson** » Tue Nov 08, 2011 9:40 am

Thanks Vince

The landing gear :
The brakes hoses are added using fine lead vire. These parts are then painted following the instructions: Rlm 02, aluminium for the shock absorber ,satin black for the wheels and Nota black for the tires. For the weathering I used Pigments CMK.

The propeller and the spinner are painted with RLM 70 ( Gunze H65)

The painted begins by pre-shading the structure lines with black

The rlm 82 et 83 are painted

Regards
michel

Dave Bayliss · Post by **Dave Bayliss** » Tue Nov 08, 2011 10:19 am

That's fantastic work Michel. Your detail work is superb! The whole job looks great.
Dave.

Post by **Editor** » Wed Nov 09, 2011 8:44 am

Wow, incredible job! Colors are spot on!

gruson · Post by **gruson** » Mon Nov 14, 2011 6:18 am

Thanks

Decals V of the "Italian BF 109 Aces- Parts III" are put.

Soon the continuation
michel

Post by **Editor** » Mon Nov 14, 2011 2:10 pm

It goes without saying ... article please when you're done

gruson · Post by **gruson** » Tue Nov 15, 2011 11:00 am

OK Vince

Thanks
michel

D520 · Post by **D520** » Thu Nov 17, 2011 12:23 pm

As it appears, Michel, the K models were not in the two shades of green like yours. 75/83/76 is a more credible pattern for a Karl. The japos books on the subject gives the camouflage patterns from the serial of production, and none are in 82/83. Toooooo Bad

Post by **Editor** » Thu Nov 17, 2011 4:07 pm

Jean, this K4 is dressed in a speculative scheme. The reference/source for the profile is given below and little is known about the plane or its camo.

BF 109 K-4 Lt Gallori Hasegawa/Stormo! 1/32

BF 109 K-4 Lt Gallori Hasegawa/Stormo! 1/32

Wrong colors